太阳3娱乐|太阳3平台

减震器样本VIEWS

太阳3娱乐|太阳3平台

P43,水泵减震器安装形式

来源:P43,水泵减震器安装形式 宣布于:2015-12-07 17:41   浏览:
太阳3注册_太阳3平台生产种种水泵减震器产物,以下是太阳3注册电子样本P43页对水泵减震器安装形式的*些简朴介绍!



P43,水泵减震器安装形式,太阳3注册电子样本
水泵减震器安装形式  Pump shock absorber installation form
种种水泵的减震  Shock absorption of horizontal pump
*、通例减震方式  conventional shock absorption method
1、概述:此种形式为水泵安装于钢筋混凝土惯性基座或钢惯性基座上(惯性基座厚度*般为≥100mm,可凭据水泵巨细而定),安装ZTA型阻尼弹簧隔振器。*般减震器数量为每台6只或以上(具体凭据种种基座的长度和隔振体系的重量),隔振器上下*般不需要牢固,安装后通过调治中间减震器的位置来使各减震器受载高度、载荷基本*致。水泵安装ZTA型弹簧减震器后,管道上须安装KXT型可曲挠橡胶BOB足球体育或JTW型不锈钢金属软管进行减震处置惩罚。
1, overview: this form is installed in the pump for the reinforced concrete inertia base or steelinertia base (inertia base thickness is generallyMore than 100mm, according to the size of the pump),
ZTA type damping spring vibration isolator installation. The number of general vibration isolator is6 per table orAbove (the length of the base and the weight of the isolation system), the vibrationisolator is generally not required to be fixed.By adjusting the position of the intermediate isolator,the vibration isolator is basically consistent with the load height and load. After the water pumpis installed in the spring,The KXT type flexible rubber joint or JTW type stainless steel flexiblepipe shall be installed in the pipeline for vibration isolation.

以上信息来源于太阳3注册_太阳3平台上海弹簧减震器官方网站,如需了解更多产物信息可以登录:查询,我们是上海实体工厂接待新老客户到我厂实地旅行考察!
工厂地址:上海市嘉定区曹胜路699号,电话:021-33666667




  • 上一篇:P44,侧面托浮式减震方式

  • 下一篇:P42,安装水泵防震基座




  • 最新推荐: